Small Wood Projects: Perfect DIY Gift Ideas

Small Wood Projects: Perfect DIY Gift Ideas

 

Handmade gifts are interesting ideas to give to your family and friends. They are affordable and enjoyable to make, especially if it’s your passion to make DIY wood projects at home. So if you have scraps that can still be used, you can turn them into beautiful wood crafts at home. There are unlimited ideas that you can do, from pencil holders to desk sets.

Quick and Easy Woodworking Ideas

 Woodworkers are always excited to see their output after spending time and effort to finish them. If you want to impress your family with some quick and easy handmade gifts, there are some helpful tips that you need to know. From keepsake boxes to shoe racks, you can surely achieve the exact results that you want. Check out these ideas to help you enjoy small wood projects:

  • With power tools and hand tools, you can create a sweet caddy or a dining tray. You can base the size on the usual kitchen utensils and flatware found in your home. Your DIY sweet caddy is also helpful in holding chargers or cords, or for inbound and outbound mails.
  • Another small wood project idea you can try is a pencil holder. You can make the box with dovetail joint and cut-out front for easier access to the papers and pens inside. A band saw or coping saw is the best tool in cutting out the front. The bottom end is quartersawn pine and glued underneath. You can use a block of scrap wood to make the pencil holder with two holes drilled.
  • If you want to display more candles in the living room, you can try the candle holder wood project. It’s a great woodworking idea if you have plenty of scraps at home. The style could be a tidily rectilinear or any design that will fit your desk and tables. Anyways, it depends on the shape, layout, and size that you have in mind.

Benefits of Working on Small Wood Projects at Home

Woodworking is a type of art where woods are shaped, carved, and formed into creative objects for repairs and decorations. Carpentry and woodworking crafts include cabinet making, TV stand making, and joinery. Small wood projects aim to create various products that can serve as pieces of furniture in your home. Thus, there are plenty of ideas you can make out of these woods and scraps.   Click HERE to learn more.

Woods have unique characteristics and are important in building houses. They also provide practical office tools, household products, and other items. Wood is strong, hard, and stiff. These are the exact characteristics you need in making wood crafts. If you want to achieve a unique texture, this is the best material to use.

Tips When Doing Small Woodworking Projects 

Aside from getting the best plan and materials, it’s also essential to understand the proper ways in woodworking. Woodwork plans will help you achieve the exact size, shape, number, and texture of your desired output. Some plans include loft bed woodwork plan, outdoor furniture layout, table woodworking plan, woodshop project design, and many more.   Click HERE to learn more.

When it comes to materials, you need to know what type of wood you need for your project. For instance, you can use mahogany, boxwood, pine, poplar, hickory, satinwood, balsa, or cedar. Without the right material, you cannot create the exact small wood project plan you want to deliver. The following are other important tools you need in woodworking:

  • hand tools
  • storage facility
  • power tools
  • wood

Types of Wood Projects You Can Do 

Woodworking is basically designing and making products from wood. Therefore, there are various types of woodwork you can engage in. They are home woodwork projects, unique woodwork projects, weekend woodwork DIY projects, and small woodwork projects for children. Choose the ideal project you want to spend your time and effort and you will surely produce quality results.

Bottom Line 

Woodworking can be done at home or anywhere you want. You can do it for personal needs or generating income. Whatever your reason for doing small wood projects, it’s important to continue improving your skills in wood crafts. With rich knowledge in woodwork, you can create unique structures that you can truly be proud of.

The unlimited products that can be made from wood are simply amazing. Woodwork can lead people to creating flawless artworks that can inspire others. If you have the passion and skill in wood crafts, work on small wood projects to discover your fullest potential. So what is your next woodworking project in mind?

Easy Woodworking Projects: Startup Ideas to Create Wood Crafts

Easy Woodworking Projects: Startup Ideas to Create Wood Crafts

Are your DIY skills good enough to create wonderful wood craft products? Do you intend to test yourself by doing some easy woodworking projects? If so, there are so many cool ideas you can try to improve your skills in doing creative woodworking DIYs like the ones listed below. And the best part is, you don’t need to be a pro in order to do them.  Click HERE to learn more.

How to Start with Easy Woodworking Ideas

 At first, it may seem complicated and difficult to start a woodworking project at home. But if you actually try it, you will realize that it’s fun and simple to do. All you need is the extra effort and time to complete your first DIY project. If you know how to use a hammer and a nail, then the rest will be easier for you. Here are some of the easiest woodworking ideas you can try right now:

  • Hanging Planter. Perhaps, you have noticed that hanging planters make a huge hit today. That is exactly the reason why you should try making your own hanging planter at home. You simply have to work on a piece of wood or any material that you want as base and put a rope on it. You can use a jig saw to shape your hanging planter; just be careful when using the saw. 

  • Wood Wall Artwork. If you love wood wall artworks, you can decorate your home with your own art signs. Why buy when you can create your own wood wall artworks and display it with pride, right? Collect some pieces of wood in your garage and put your creative artwork on it. This wood craft is not only fun to do, but it also provides a practical decor at home. 

  • Utensil Organizer. Do you want to put some personal touch in your kitchen wares? You can make your own utensil organizer using scraps of wood and nail them together to form a mini compartment where you can put your forks and spoons. Paint them too add color to your kitchen.


  • X-Shaped Coasters. Another practical woodworking idea is the x-shaped coaster project. If you have unused sticks in your storage room or garage, you can repaint them so they will look like brand new. Then, nail them to form an x-shaped coaster. Repeat it until you achieved the desired number of cool coasters for your guests.

 An Easy Woodworking Project For You

Let’s make it a little more detailed for you so you will be guided on how to start an easy woodworking project. Today, you will learn how to create a personalized paper towel holder. All you need are the following materials to start making this wood craft:

  • Jig saw
  • table saw
  • disc sander
  • orbital sander
  • drill press with 3/4” diameter forstner bit
  • router with 1/4” radius roundover bit and 1/16” radius roundover bit
  • bar clamps with 12” opening
  • trammel point set

Steps to Follow

The paper towel holder is an excellent gift idea for special occasions including Christmas. It’s so easy to make but there are some important things to consider before doing this woodwork. Watch out for the drifting drill bits as you drill holes on the wood. Using an awl can help you punch the center points safely while guiding the bits when you drill the holes. To start the project, follow these simple steps:

  1. Review your construction design to make the woodwork process easier.
  1. Stick 3 bits together using a glue to make a sturdy base.
  1. Layout the circle shape and holes on the base. After countersinking and drilling the holes, cut out the circle shape. Then smooth the edges and mob the 1/4” radius roundover bit.
  1. Cut the stay bar, center post, and bits to the desired sizes. Layout a finger hole on the center post and the radius top ends of each bit. Then drill the finger hole on the center post.
  1. Use the 1/16” radius roundover bit in order to circle over the edges. The bit creates a tiny eased edge looking roundover. You can smooth the edges to create a finger-friendly paper towel holder.
  1. Cut the circle-shaped top ends of the stay bars and center post. Lay out the pilot holes and drill the screw at the bottom end of each bit. Mob the 1/4” radius roundover edges and smooth the parts.
  1. You can now apply the finishing to complete the woodwork project. Ideally, you can use a wipe-on, water-based polyurethane because it’s quick and long-lasting.

Beginner Woodworking Projects

Beginner Woodworking Projects

We have two beginner woodworking projects below. They will be a good exercise for your cutting, carving, whittling, measuring, and drilling skills. Of course some machine work will also be needed. These projects are easy enough for any beginner.

Basic Peg Rack

Peg racks have always gone behind the door or at the back walls, which keep them out of sight. Well, that was how they were used during the days when wire hangers weren’t invented yet. With a little fine tuning you can make these peg racks look great. They can contribute to your décor and add some much needed functionality as well.

Note that this project will be an exercise of your whittling skills. Of course along the way you’ll practice measuring, drilling, cutting, and assembly. Whittling takes away a lot of machine work and it gives you the opportunity to practice some real raw hand crafting skills.

Tools and materials needed:

  • Block plane
  • Whittling knife
  • Scroll saw
  • Table saw
  • Drill
  • ½ inch drill bits
  • Leather thumb guard
  • Wood carver’s glove
  • Small square
  • Lint free cloths
  • Sandpaper
  • Carpenter’s glue
  • Safety glasses
  • Pencil
  • Stain brush
  • Water
  • Mineral spirits
  • Finishing gloves
  • Respirator
  • Steel wool
  • ¼ pine for whittled pegs
  • 20” long back board

Cutting List

  • Peg blanks – 4 pieces, dimensions: 9/16″x1″x 3-1/2″
  • Back board – 2 ¾ inches wide, cut this according to your desired length. Space each peg about 4 to 5 inches apart. Dimensions: ¾” thickness

Instructions

  1. Cut the template of the pegs out of the cardboard. Shape the profile as you need – make sure that hook curves out. Cut the pine board according to the profile that you drew. Make as many pegs as you want or need. Remember that you should orient the grain so that it runs parallel to the blank’s bottom edge.
  2. Put on a wood carver’s glove and a leather thumb guard. Whittle away on the peg blanks using your whittling knife. Remember to make smooth, clean, and controlled cuts. This means you need to keep your knife really sharp.
  3. Make sure that the shoulder lines of the head of each peg are extended across the blank’s top. You can cut squarely along the lines to define the shoulders. Use a backsaw to remove the waste outside of the tenon.
  4. Make shallow flat cuts across the end grain of the wood to create a convex curve for the head.
  5. Chamfer the outer edges to finish each peg.
  6. Cut the back board to the needed length. You should measure the back of the door or some other area where you want to install this peg board. Mark where you want to install each peg. Space them evenly.
  7. Drill ½ inch holes on the areas that you marked.
  8. Apply some glue on the insides of the holes and then insert each peg in their designated holes. You may have to twist them in to fit. Make sure that they are perpendicular to the board. Use a small square to make sure.
  9. Finally, allow the glue to dry and then stain and finish your peg board.

Western Style Candle Holder

This project is a lot easier than the first one. You don’t need to do any whittling on this one but you will have to practice some drilling. You also need to find a pair of horse shoes to complete the effect.

Tools and materials needed:

  • 2 feet long 2 x 4 block
  • A pair of horse shoes
  • Nails
  • Drill
  • 5 candle holders with candles inside (get the ones that look like water glasses)
  • Hammer
  • Sandpaper
  • Pencil
  • Your choice of finish

Instructions:

  1. The first thing you need to do is to get clean the wood and the horse shoes. You can even use an old 2 x 4 block that you have on stock – no need to buy a new block.
  2. Sand away on the wood to give it a nice new look
  3. Place the candle holders on top of the block of wood and trace their bottoms with a pencil. Make sure to space them evenly.
  4. Drill holes for the spots for each candle holder. Make each hole about ½ inch deep.
  5. Sand out the excess material from the holes
  6. Nail one horse shoe on each end of the block. Make sure that each horse shoe is secure.
  7. Apply wood finish
  8. Allow the finish to dry and then place the candle holders on each of the holes or place holders. And there you have it.

Wood Projects for Beginners

Wood Projects for Beginners

You will find below some of the easiest, attractive, yet useful wood projects for beginners. The best thing about these projects is that you don’t need an entire workshop or a complete set of tools to get them done. All you need are some common wood working tools and a bit of patience. Check them out below!

Beginner Project #1 – Wooden Chopping Board

This chopping board doubles up as a serving tray, which is quite innovative. After chopping up your food on it, you can give it a quick rinse and then serve the food on top when it’s cooked.

This project will take 1 day to finish and is very easy. It’s also a cheap project since the materials will only cost less than $20.

Here are the tools and materials you will need:

  • Tape measure
  • Safety glasses
  • Orbital sander
  • Miter saw
  • Jigsaw
  • Forstner drill bits
  • Cordless drill
  • Two 5-in. x 1/2-in.-diameter dowels for the handles
  • A pair of 23-1/2-in. x 1/2-in. x 3/4-in. walnut strips
  • Three pieces of 20-in. x 3-1/2-in. maple boards
  • And four pieces of 3/4-in. x 3/4-in.-diameter dowels

Procedure

Grab your walnut strips and drill half inch holes centered about three quarters of an inch from the ends. Clamp all five boards together. Mark the arcs or curves at the end of the boards using a pencil.

Take the boards off the clamp, saw the arcs and then sand them. Glue the board assembly together but leave the dowels (i.e. the handles) unglued.

Drill three quarter holes on each on each of the underside corners of your chopping board. Make them a quarter of an inch deep. Glue in the feet and the handles. Wipe on two coats of Butcher Block Oil.

Beginner Project #2 – Wooden Bench

Need to make something where your guests can sit on? Things don’t have to be complicated or expensive. This bench follows suit after the classic Aldo Leopold design, which is pretty streamlined. It’s so easy to make you only need two hours to work on each bench. It only requires the most basic of tools and all you need to build it is a pair of boards and 18 screws. When you’re done, each bench will cost only $25 (excluding labor of course).

Here are the tools and materials that you will need to complete this project:

  • Two 10-foot 2x8s
  • Exterior finish
  • 2x8s
  • Construction adhesive
  • Speed square
  • Circular saw
  • Drill/driver
  • Cordless
  • Countersink drill bit
  • 2-1/2-in. deck screws

Here are the things you need to cut out from the pair of 10 foot 2 x 8 boards:

  • Rear legs – cut them out as 2×8 x 17-1/4″ make sure to make 22-1/2-degree cuts.
  • For the front legs – cut out 2×8 x 36″ making 22-1/2-degree cuts on the wood.
  • For the seat you need to cut out 2×8 x 42″ pieces
  • Finally, for the back you need to cut out 2×8 x 45″ pieces Instructions and Assembly

Instructions and Assembly

Remember that you should be getting rot resistant wood. These benches will tend to be exposed to the elements, which is why they need to be tough and sturdy. Begin by cutting out the legs from the 2 x 8 x 10 foot boards. Start at one end of the board. Mark and then cut out the 22 and ½ degree cuts. You will need to cut at that angle about 5 times which will produce the four legs of this bench.

After that you need to cut out the seat and then the back rest from the 8 x 2×8 foot boards.

After that you should lay out and then assemble the sides. They should be mirror images of each other. Next, join the legs using 2 and ½ inch deck screws plus construction adhesive.

Use a countersink bit to predrill the screw holes. This will help prevent the wood from splitting. Setup the sides so that they are parallel to each other. Finally glue and screw the back and the seat into place.

Give for the glue on the assembled pieces some time to dry. As a finishing touch, coat the exterior with a stain and then let it air dry.

And that pretty much completes our wood projects for beginners. If you enjoyed working on these projects, you will surely enjoy the our other projects.

DIY Woodworking Project: Storage Box

There are lots of DIY woodworking projects that are perfect for beginners and do not require sophisticated tools. The following is a step-by-step guide on how to create a storage box. This DIY storage box is easy to make and takes only a little of your time. It only needs everyday simple tools.   Click HERE to learn more.

Materials needed:

  • Choice of wood
  • PVA glue
  • Tape
  • Pencil
  • Screws, pins
  • Two hinges
  • Clamps

Tools needed:

  • Skill saw, hand saw or mitre saw
  • Jigsaw (tool used to cut angles)
  • Hand sander with different grit levels
  • Cordless drills
  • Glue roller
  • Set Square
  • Biscuit Joiner with number 10 biscuits

Instructions:

1. Choose the wood

The box can be made out of any wood. The type of wood to be used depends on how the storage box would be used. It can be made from cheap materials like soft wood, MDF board and plywood. If it needs to be more durable, it can be made from hard wood like maple, cherry, mahogany and walnut.

2. Determine the size

Determine the size of the storage box. Cut the wood according to your desired size. Use the skill saw, hand saw or miter saw to cut the wood. In marking the lines, use the long set square. These lines will be used as a guide in using the biscuit joiner.

3. Attach the Biscuit Joiners

Work on a flat surface while attaching the biscuit joiners. Working on uneven surfaces may cause the joints to mismatch.

Choose the joiner height. Set the blade depth to the center of the biscuit. Do not glue or attach any joiner unless everything has been set in place. It is a better idea to do a dry assembly first. After the dry assembly has been done, you may now attach the parts together. Use a glue roller to apply the PVA or wood glue generously and evenly. Make sure to use a damp cloth to wipe any excess glue.

Use the clamps to pull the parts together.

4. Support Angles

The support angles play a crucial role in the integrity of the storage box. It is important to perform this step carefully.

Cut the support angles using a saw. It is important to keep away any screw or metal part from the part of the blade.

After cutting the timber, screw together two (2) screws to support the cut timber. You should be able to make four (4) support angles. After successfully cutting and attaching the two timbers together, sand the angles down. An angle end may also be cut to add an aesthetic design.

5. Making the lid

The next step in making this DIY woodworking project is to make the box lid. There are various box lid designs to choose from. It can be a plain solid one. If you are a little tight on the budget, you can also piece together planks or old pieces of wood together to create it into a patchwork type of box lid. If you have a knack for wood carving, you can carve a design on to the lid. The design is entirely up to the maker.

After making the lid, attach joint biscuits. These biscuits should be placed close to each other since the lid will be used a lot.

Do not forget to attach the hinges.

6. Check the shape and integrity of the box

Place clamps around the box to insure its square shape. If you do not have these clamps, a ratchet strap around the box will do. This will secure the box while the glue sets in. Screws and nails can also be used to ratify and reinforce the box.

7. Glue the box base

After the glue gets dried, the box base may now be glued on the box. Just like in attaching the other parts, use a glue roller to apply the glue generously and evenly. Use a damp cloth to remove the excess glue. Aside from the box base, support strips may also be attached around the box. Nails and screws can also be used.

Some have improvised the design by also making the box base as some sort of a detachable lid as well.

8. Sanding and other aesthetic designs

Once the glue dries up, the box can be sanded. It can also be painted according to the needs of the user.

DIY woodworking projects are one of the many activities that one can do to improve the aesthetics of a house or office. A storage box is a great way to organize your things.

DIY Wood Projects

Three DIY Wood Projects

DIY wood projects are incredibly easy to make. They are also surprisingly cheaper to make than buy. It is therefore a good idea to take out that tool box out and get started on woodworking. The following DIY wood projects require minimal woodworking knowledge and simple tools.

  • Magazine Storage Bins

This project acts not only as a storage bin for magazines; it can also hold small books and other paper materials. A plastic or metal storage bin cost a bit in retail stores. Making one for your own will literally cost you pennies.

Materials needed:

  • One by four pine wood
  • ¼ inch of plywood

Tools needed:

  • Air hose
  • Air compressor
  • Nail gun
  • Cordless drill
  • Saw
  • Drill bit set
  • Orbital sander
  • Jigsaw
  • Safety googles

Instructions:

  1. Mark the cuts

Cut the plywood into eight pieces measuring 11 ½ inches by 11 inches each. Using a one-galloon bucket, trace an s-curve from the corner of the plywood. Establish a smooth curve.

  1. Cut the curves

After marking the curve, stack the pieces together making sure that the curves are stacked on each other. Cut the curves carefully using the jigsaw or band saw. These pieces make the main side panels of the magazine storage bin.

Cut the pine boards into 6 inches, 9 and a half inches and 11 and a half inches length. These will make the other parts of the storage bin.

  1. Put it together

After cutting the curves, put the pieces together using nails. Use the S-curve panels as the sides.

  • Tree Branch Table

The following is a step-by-step guide on how to make your very own tree branch table. The DIY wood project table gives a very rustic yet classy vibe.

Materials needed:

  • Rectangular wooden
  • Thick branches
  • Thin branches
  • Glass top
  • Paint, preferably black

Tools needed:

  • Hot glue
  • Saw
  1. Pick the right box

Use a rectangular box as the ‘bones’ or base of this table. The box has to be stable enough to carry some weight as a table. A wine crate can be a good base for this table.

  1. Gather branches

Gather branches. Pick the branches that are both thick and thin. It should be noted that the thin branches should be straight and not too bent.

  1. Preparing the branches and box

The box should also be painted in black. Leave the box for the paint to dry. Meanwhile, cut the thick branches cross-sectional. Clean the thin branches for any leaf.

  1. Piecing it together

Glue the thin branches to the top and sides of the table. Glue the branches closely together to make it seem like the table is made from a solid stack of branches. The slices of the thick branches, on the other hand, will be glued to the shorter side of the table. The thin branches should be glued together tightly to make an illusion that the table is made from stacked branches.

  1. Those little touches

Place felt strips at the feet or bottom of the table. This will prevent the table from scratching the floor.

After the paint and glue has dried, place the glass top on the table.

  • Wooden Orbit mirror

This project can be used to up your room’s aesthetic appeal. The design was inspired from a thousand-dollar piece from a famous retail store. But it’ll only cost a few dollars.

Materials needed:

  • 10 to 15 SMALL wood cutouts measuring 1.5 inches each
  • 10 to 15 LARGE wood cutouts measuring 3 inches each
  • Five to 10 SMALL circular mirrors measuring 1 inch each
  • Five to 10 LARGE circular mirrors measuring 2 inches each
  • Wood glue
  • Tape or hooks
  • Tea bags

Instructions:

  1. Stain the wood

Stain the wood using the tea bags. Black tea bags will do the job best. Coffee grounds can also be a good substitute. However, the color will be a lot darker when using coffee grounds. Let the wood dry for at least an hour.

  1. Attaching the mirrors

Attach the mirrors to the wooden pieces carefully using PVA or wood glue. It is preferable to use the small mirrors for the small wood cutouts and the large mirrors for the large wood cutouts. You can be playful in placing the mirrors. The mirrors do not have to be at the dead center of the wooden cutouts.

  1. Attach the wood cutouts together

Attach the wood cutouts together using wood glue. Dry the pieces overnight.

  1. Hang it with pride

Hang the finish project on the wall using tape and hooks.

Wood furniture has a certain charm to it. It gives off a rustic and homey vibe that Americans truly love.